There are a multitude of cigar cutters on the market. However, not all are equal, especially depending on the calibers you prefer, certain models are more recommended than others. Here’s how to choose the right cigar cutter.
Cutting your cigar: a skill to acquire
Cutting your cigar is an essential act for every smoker. But to enjoy its volute, it is important to head it well. Indeed, a poorly cut cigar will not burn properly, the wrapper may come off and this can also cause drawing problems. There are 4 types of cigar cutters, here they are in detail and what type of cigar to use them for.
The single or double blade guillotine cigar cutter
This is the most widespread and popular model. There are single or double blades. Their advantage? They cut the cap precisely and cleanly. The draw is optimized thanks to a so-called wide cut. Pay attention to the diameter of your cigar! You need a suitable tool!
Be careful, it takes some time to become familiar with the guillotine cigar cutter. Double blade models are easier to use. When in doubt, start with a double spring-loaded blade.
The cigar drill
This is the tool to use when starting out, because it is very simple and ensures a clean cut. Simply plunge the cigar drill into the head and using a twisting movement, remove a small circle from the cap. It adapts to the size of the cigar, so choose your model carefully.
The V-shaped cigar cutter
More complex, this type of cigar cutter will remove a piece of the wrapper, on the head. The slot made will allow a good draw. There are three types of V-cut: table, piston or blade. But be careful, they are not recommended for sharp cigars.
Cigar cutting scissors
It’s an old system that is only used by purists. Elegant, they remain difficult to use. On the other hand, they allow you to cut all diameters without distinction. The movement is complex since you have to measure your strength and play with a twisting movement at the same time.
